Ufakelo olusemgangathweniUkuhlohla

Iikhabhinethi kunye neewodrophu zenziwe ngeekhabhinethi, iipaneli zeengcango, ii-countertops, izixhobo zombane, izixhobo ezisebenzayo, njl.njl. Kufuneka zifakwe kwaye zilungiswe kwisiza ngaphambi kokuba zigqitywe iimveliso. Abasebenzi bofakelo beVicrona Orangeson baya kuba noluvo oluphezulu loxanduva kunye nobuchwepheshe bezakhono. Kwaye ufake imveliso ngokwemigaqo.

1. Ukukhutshwa nokuhlolwa

A. Ibhokisi yokupakisha yangaphandle igqityiwe kwaye inani leebhokisi lichanekile;

B. Akukho mikrwelo okanye i-deformation ebonakalayo kumphezulu wepaneli yomnyango, akukho degumming ye-edge banding strips, kwaye akukho mahluko ocacileyo wombala kumbala jikelele wepaneli yomnyango; akukho mikrwelo okanye i-deformation ebusweni bephaneli yomzimba wekhabhinethi, kwaye akukho degumming ye-edge banding strips;

C. I-countertop ayiphulwanga, yonke i-flat kwaye ayinayo i-deformation, umphezulu awukhatywanga, akukho mahluko ombala ocacileyo, i-gloss iyonke iyahambelana, i-backing plate i-flat kwaye ayilingani, uxhulumaniso luthe tye, isitovu kunye nesitya zibekwe ngokuchanekileyo, kwaye isiphelo sesitovu / isitya somlomo sibushelelezi kwaye siyakhazimla;

D. Akukho ziphene ezisemgangathweni kumphezulu wezixhobo ze-hardware, kwaye ukusebenza kuqinisekisiwe ngexesha lofakelo kunye nokulungiswa kweempazamo;

2. Ufakelo kunye nolungiso lweekhabhathi ezisisiseko:Emva kokufakela, iikhabhinethi zesiseko kufuneka zilinganiswe kwinqanaba lokuqinisekisa ukuba ukuphakama okupheleleyo kweekhabhinethi zesiseko kuhambelana;

3. Ukufakwa kunye nokulungiswa kweekhabhathi eludongeni: Qinisekisa ukuba ukuphakama kofakelo lweekhabhinethi zodonga kuhambelana. Ukuba kukho umgca ophezulu, qinisekisa ukuba i-gap phakathi komgca ophezulu kunye nepaneli yomnyango wekhabhinethi yodonga ifana;

4. Ufakelo kunye nohlengahlengiso lweepaneli zomnyango: Umgangatho wofakelo lweepaneli zocango kukuba izithuba ezisekhohlo nasekunene phakathi kweepaneli zocango ezikufutshane ziyi-2mm, kwaye izikhewu eziphezulu kunye nezantsi ziyi-2mm; ngokulungelelanisa iihenjisi zocango, iipaneli zocango zinokuvula kwaye zivale ngokutyibilikayo, iihenjisi zocango azinangxolo engaqhelekanga, azikho i-jamming, kwaye iipaneli zocango zithe tyaba kwaye zithe nkqo. ; Isibambo kufuneka sifakwe ngokuqinileyo kwaye siqonde.

5. Ufakelo kunye nohlengahlengiso lweedrowa: Iireyile zedrowa zifakwe ngokuqinileyo ngaphandle kokungcangcazela okucacileyo, ukutsalwa okugudileyo, akukho ngxolo engaqhelekanga, kwaye akukho ngqimba. Iphaneli yedrowa ilungelelaniswe njengepaneli yomnyango ukuqinisekisa ukuba izithuba zilinganayo kwaye zithe tye kwaye zithe nkqo.

6. Ufakelo kunye nokulungiswa kwezixhobo zezixhobo zehardware (kubandakanywa iindawo zokuhlala ezingaphezulu nangaphantsi zocango, izincedisi zocango olutyibilikayo, izincedisi zokusonga iingcango, njl. njl.): Hlanganisa ngokungqongqo ngokweemfuno zemizobo yofakelo lwezixhobo. Emva kokufakela, khangela umgangatho wezixhobo, ukuvula, ukuvala kunye nokukhupha. Itsala kakuhle, akukho jamming. 7. Ufakelo kunye nokulungiswa kwe-countertop: I-countertop iyonke kufuneka ibe sicaba ngaphandle kokuguqulwa okucacileyo, kungabikho mikrwelo kumphezulu, i-backing plate kufuneka ibe sicaba kwaye kungabikho ukungalingani, iindawo ezidibeneyo kufuneka zidityaniswe ngokuhambelana nemimiselo, kwaye kufuneka kubekho. kungabikho zithuba zicacileyo kumalungu; i-countertop kufuneka isetyenziswe emva kokuba ifakiwe. Umlinganiselo wenqanaba, ukuhlolwa

7. Khangela ukuba i-countertop ilula, kwaye khangela ukuba i-countertop kunye nekhabhinethi zisondelelene. Ukuba kukho umsantsa phakathi, ukuphakama kwesiseko sekhabhinethi ehambelanayo kufuneka kuhlengahlengiswe ukwenzela ukuba iipaneli zecala zekhabhinethi yesiseko zithwale ngokuchasene nezantsi kwe-countertop.

8. Ukufakwa kwezinto zokuhombisa (kubandakanywa iibhodi, imigca ephezulu, iipleyiti zokutywina eziphezulu, imigca ekhanyayo kunye neengubo):Xa ufaka imigca ephezulu, kufuneka kuqinisekiswe ukuba umgca wangaphambili uphuma ngaphandle kwekhabhinethi kumgama ohambelanayo.

9. Ezinye iingongoma ezifuna ingqalelo: Zonke iikona kunye nokuvuleka kwikhabhinethi kufuneka ziqondiswe ngomatshini omncinci we-gong. Ezo zinokuvalwa emacaleni kufuneka zitywinwe ngemicu ebhantini. Ezo zingenako ukuvalelwa emacaleni kufuneka zitywinwe ngeglue yeglasi. Eminye imingxuma eqhelekileyo kufuneka igqunywe ngemikhono yerabha. 10. Ukucocwa kweekhabhinethi: Emva kofakelo kunye nokulungiswa, uthuli kunye nokungcola okuveliswe ngothuli kwicandelo ngalinye ngexesha lofakelo kunye nenkqubo yokucoca kufuneka kucocwe, kungenjalo kuya kuchaphazela kakhulu ukubonakala kwemveliso kwaye konakalise ukusebenza kwezinye izixhobo ze-hardware. ;

11. Imigangatho yokwamkelwa komgangatho wokufakelwa kwekhabhinethi

11.1 Iimfuno zobugcisa:

Isiseko sekhabhinethi (ikhabhinethi ethe nkqo) ukufakwa

11.1.1. Ukuphakama kofakelo lwesiseko sekhabhinethi (ikhabhinethi ethe nkqo) iya kuhambelana neemfuno zomzobo. Umzantsi womzimba wekhabhinethi uya kugungxulwa kwaye ube kumgca othe tye ofanayo. Inyathelo elithe tye liya kuba ≤0.5mm. Amacala ekhabhinethi aya kuba yi-perpendicular kwi-horizontal kwaye inyathelo elithe nkqo liya kuba ≤0.5mm.

11.1.2. Iikhabhinethi ezisisiseko (iikhabhinethi ezimileyo) kufuneka zibekwe ngokuzinzileyo, kunye nemikhosi elinganayo. Iikhabhinethi kufuneka zihlanganiswe ngokuqinileyo. Akufanele kubekho izithuba ezibonakalayo kwiikhabhinethi zokhuni kunye ne-≤3mm kwiikhabhinethi zetsimbi.

11.1.3. Isikhundla sokuvula (ukusika) somzimba wekhabhinethi sichanekile, ubukhulu buhambelana nemizobo okanye iimfuno zomzimba, ukusika kucocekile, kuhle, kwaye kugudileyo, ngaphandle kwezikhala ezinkulu, kwaye akuthinteli ukufakwa kunye nokusetyenziswa.

11.1.4. Iipaneli zomnyango zilungelelene kwaye zithe tye, zilungelelaniswe kakuhle phezulu naphantsi, kumgca othe tye othe tye, kwaye inyathelo elithe tye ngu ≤0.5mm; umgca othe nkqo u-perpendicular kumgca othe tye, kwaye inyathelo elithe nkqo ngu-≤0.5mm; isithuba phakathi kweengcango zekhabhathi yomthi yi-≤3mm, kwaye isithuba phakathi kweengcango zekhabhathi yentsimbi yi-≤5mm. ; Iphaneli yomnyango ivula ngokukhululekileyo, ngokucokisekileyo kwaye ngaphandle kokukhululeka; iimpawu, amasuntswana erabha achasene nokungqubana kunye neempawu ezichasene nenkohliso ziphelele kwaye zintle.

11.1.5. Iinyawo zekhabhinethi kufuneka zidibanise nomhlaba. Akumele kubekho ngaphantsi kweenyawo zekhabhinethi ezi-4 ngemitha nganye kwaye amandla kufuneka alinganise kwaye angonakaliswe. Iipleyiti zeenyawo kufuneka ziqiniswe ngokuqinileyo kwaye akufanele kubekho ukuvuleka xa udibanisa.

11.1.6. Iidrowa, iingcango ezityibilikayo, njl.njl. zinokutyhalwa zitsalwe kakuhle ngaphandle kwengxolo. 11.2 Ufakelo lwekhabhinethi eludongeni (ibhodi yeshelufu).

11.2.1 Ubude bofakelo lwekhabhinethi eludongeni (ibhodi yeshelufu) iya kuhambelana neemfuno zomzobo. Umphezulu kunye nezantsi kwikhabhinethi yodonga iya kuhambelana nomgca othe tye, kunye nesinyathelo esithe tye ≤ 0.5 mm. Amacala ekhabhinethi aya kuba yi-perpendicular ukuya kwi-horizontal, kunye nesinyathelo esithe nkqo ≤ 0.5 mm.

11.2.2 Iikhabhinethi zodonga (iibhodi zeshelufu) zifakwe ngokuqinileyo ngaphandle kokukhululeka, kwaye imikhosi ilinganisela. Umzimba wekhabhinethi (iibhodi zeshelufu) zihlanganiswe ngokuqinileyo. Akukho zithuba ezibonakalayo kwiikhabhinethi zokhuni kunye nezikhewu kwiikhabhinethi zetsimbi ≤3mm.

11.2.3 Iimfuno zokuvula (ukusikwa) kwebhodi yekhabhinethi eludongeni ziya kusebenza ku-2.1.3.

11.2.4 Iimfuno zofakelo lweepaneli zeengcango zekhabhathi eludongeni ziya kusebenza ku-2.1.4.

11.2.5 Iindawo zokubeka iipleyiti zokutywina (iipleyiti zokutywina), iipleyiti ezixhasayo (iziketi), uphahla, kunye neepleyiti zokutywina zoluhlu ziyahambelana neemfuno zomzobo kunye neemfuno zokwenyani, kwaye ziyangqinelana nendlela yekhabhinethi; ufakelo luqinile, luqinile, lwendalo, kwaye alunakulungelelaniswa. 11.3 Ufakelo lweCountertop

11.3.1 Umgca wofakelo we-countertop uya kuhambelana nomgca othe tye, inyathelo elithe tye liya kuba ngu-≤0.5mm, kwaye umphezulu uya kuba flat, ugudileyo kwaye ukhanye. Akukho manqaku acacileyo adibeneyo kwi-countertop yamatye eyenziweyo, kwaye akukho kuguquguquka okucacileyo. Emva kokuba umatshini wokupholisha odibeneyo ufakiwe kwaye uphuculwe, uya kuqaqamba njengakuqala. Ibhodi yomlilo (i-Nimeishi, ibhodi ye-Aijia) ihlanganiswe ngokuqinileyo, kwaye uxhumano luqinile kwaye alunamthungo; i-countertop ibekwe ngokuzinzileyo, ngaphandle kwe-warping (deformation), kwaye i-gap phakathi kwayo kunye nomphezulu wekhabhinethi yesiseko ngu-≤2mm.

11.3.2 I-countertops yezinga eliphezulu kunye nezantsi zihambelana nomgca othe tye, kwaye amanqanaba aphezulu kunye nasezantsi adibaniswe ngokusondeleyo kwaye utshintsho lungokwemvelo kwaye lulula.

11.3.3 Isithuba phakathi kwe-countertop kunye nodonga luncinci: isithuba phakathi kwe-countertop yamatye eyenziweyo, i-marble countertop kunye nodonga ngu-≤5mm; isithuba phakathi kwebhodi yomlilo (i-Naimeishi, ibhodi ye-Aijia) i-countertop kunye nodonga ≤2mm (udonga luthe tye). Iglu yeglasi efakwe kwi-countertop eludongeni ilinganayo, iphakathi kwaye intle.

11.3.4 Isikhundla sokuvula itafile (ukusika) ichanekile, ubukhulu buhambelana nemizobo okanye iimfuno zomzimba, ukusika kucocekile, kuhle, kwaye kugudileyo, ngaphandle kwezikhala ezinkulu, kwaye akuthinteli ukufakwa kunye nokusetyenziswa.

11.3.5 I-nameplate (ibhodi yomqondiso) kunye neempawu ezichasene nokwenza umgunyathi kwi-countertop kufuneka zincanyatheliswe ngokuchanekileyo, ngokuqinileyo nangobuhle. 11.4 Ukufakwa kweevenkile zamasebe kunye nezixhobo

11.4.1 Isitya sifakwe ngokufanelekileyo, iglue yeglasi ifakwe ngokulinganayo kwaye isetyenziswe ngokulinganayo, kwaye idibene ngokusondeleyo ne-countertop ngaphandle kwezikhala; iipuphu, i-drain, kunye nemibhobho yokuhambisa amanzi ifakwe ngokuqinileyo kunye ne-tape ye-raw material (PVC glue) kwaye idibene ngokuqinileyo. Kwakungekho kuvuza kuvavanyo lokuvuza kwisiqingatha seyure emva kofakelo, kwaye akukho manzi aqokelelwe kwisitya.

11.4.2 Isithando somlilo sifakwe kakuhle, indawo yokudibanisa isithando somlilo ayinamanzi, i-rubber ye-rubber ye-insulation ifakwe kakuhle, i-accessories igqityiwe, kwaye akukho nto ingaqhelekanga ngexesha lovavanyo.

11.4.3 Ubude bofakelo lwe-hood yoluhlu luhambelana nemizobo okanye iimfuno ezichanekileyo, ukufakela kuqinisiwe kwaye akukhululekanga, kwaye akukho nto ingaqhelekanga ngexesha lovavanyo.

11.4.4 Indawo yofakelo lwezincedisi ezifana neepuli neetoti zokulahla inkunkuma ichanekile kwaye yomelele, ayikhululekanga, kwaye inokusetyenziswa ngokukhululekileyo nangokutyibilikayo.

11.4.5 Indawo yofakelo lweefreyimu zokuhombisa kunye neepaneli ziya kuhambelana nemizobo okanye iimfuno zokusetyenziswa. 11.5 Isiphumo sisonke

11.5.1 Ucoceko kunye nococeko lulungile, uthuli ngaphakathi nangaphandle kwekhabhinethi, iipaneli zeminyango, ii-countertops kunye nezixhobo ezixhasayo kufuneka zisuswe, kwaye inkunkuma eseleyo kufuneka isuswe kwindawo.

11.5.2 Ufakelo lucocekile, lulungelelanisiwe kwaye luhle, kwaye akukho ziphene ezicacileyo zomgangatho kwiindawo ezibonakalayo.

11.6 Inkonzo: Zama ukuhlangabezana neemfuno ezifanelekileyo zabathengi, chaza iimfuno ezingafanelekanga, thetha ngokufanelekileyo, kwaye ungaxabani nabathengi.